How to Choose a HEPA Filter Making Machine for Your Production Line

Back to list

Choose the Pleat Machine For Hepa Filters when your line needs pleating, glue application, cooling, folding, and conveying in one process. Its working range suits filter production that fits a maximum folding width of 700mm and an origami height of 20 to 100mm.

How to Choose a HEPA Filter Making Machine for Your Production Line
Illustration for reference; see the product page for actual photos and specifications.

700mm

Maximum folding width

20 to 100mm

Origami height

2m to 38m/min

Production speed

25.4mm

Glue line spacing

A HEPA filter making machine should match the filter dimensions, pleat range, glue process, utilities, and available floor space before you compare purchase options. For the requirements covered here, the Pleat Machine For Hepa Filters is the applicable choice because its process connects the main pleating and filter-forming stages.

Match the machine to your filter dimensions

Start with the largest folding width and the required origami height. The machine accepts a maximum folding width of 700mm, while its display screen can set an origami height from 20 to 100mm. That range suits a production line making filters whose pleat dimensions stay within those limits.

ParameterPleat Machine For Hepa Filters
Maximum folding width700mm
Origami height20 to 100mm
Production speed2m to 38m/min
Glue line spacing25.4mm
Hot melt glue machine capacity50L
Total power15KW
Equipment dimensions7000×1700×1800 mm

If your filter design requires a wider folding width or an origami height outside this range, this machine is not the right dimensional fit. Measure the filter paper path and finished pleat requirements before requesting a configuration.

Check whether the process fits your line

The machine process begins with filter paper tension control and indentation, then moves through trimming, glue nozzle opening and merging, automatic glue spraying, cooling, folding and forming. An aluminum roller and conveyor belt transfer the formed material.

This integrated sequence suits a line that needs pleating and glue application connected in one equipment flow. The machine also supports continuous glue spraying, single-sided and double-sided glue injection, surface glue breaking, AB glue breaking, misplacement glue injection, and a selectable break pattern of glue injection for each fold.

Review production speed and pleat consistency

The production speed is 2m to 38m/min. Use the lower or higher part of that range only after matching the material, glue process, pleat dimensions, and downstream handling requirements of your line.

The product description specifies uniform corrugation spacing and a very flat folding height. It also states that the filtering effect can reach 99.9999%. These properties suit buyers who need controlled pleat formation and consistent spacing in the filter-making process.

Confirm glue and cooling requirements

The hot melt glue machine has a 50L capacity and requires 30 minutes of preheating. Glue line spacing is 25.4mm. The cooling method uses multi-axis natural cooling and fan cooling.

These details matter when planning the start-up sequence and the space around the glue and forming sections. Include preheating time in the production plan, and check that your site can accommodate the machine's 7000×1700×1800 mm dimensions.

Our advice

Choose the Pleat Machine For Hepa Filters for filter production within its folding range and for lines that need integrated tension control, trimming, glue spraying, cooling, folding, forming, and conveyor transfer. Check filter dimensions, glue arrangement, 380V/50HZ supply, 15KW power, 50L glue capacity, 30-minute preheating, and the 7000×1700×1800 mm equipment footprint before ordering.

What to weigh

Filter dimensionsmaximum folding width 700mm and origami height 20 to 100mm
Line fitspeed, glue process, utilities, cooling, dimensions, and material transfer

Your shortlist

Pleat Machine For Hepa Filters

Check utilities and installation space

The machine uses a 380V/50HZ power supply and has a total power of 15KW. Its listed dimensions require a clear equipment area that can accommodate the 7000mm length, 1700mm width, and 1800mm height, together with the material entry, conveyor transfer, operator access, and maintenance space required by your layout.

Choose this machine when your plant can provide the stated electrical supply and floor area and your filter sizes fit the folding range. Send your filter dimensions, target origami height, glue arrangement, and available layout space with the equipment inquiry so the proposed setup can be checked against your process.

The company

ANYA FILTER MEDIA CO., LTD

Shijiazhuang Anya filter media co.,Ltd has been manufacturing a variety of filter medias for lots of filters since 1992. Our mission is to provide maximum value to customers through the continuous pursuit of improvement programs in areas of quality, cost and service. We have the advanced production equipment to manufacture high quality products. We ensure products to meet their specifications and high performance by our strict quality control system.…

About Us ↗Visit company website ↗

Post time: Nov-23-2026
Prev:
This is the last article

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


WhatsApp Online Chat !